Double Sided Tape in the UAE: Types, Uses and How to Choose

Key Takeaways

  • AAB Industries is a specialist in manufacturing and customising self-adhesive tapes for the logistics, food manufacturing.
  • And engineering sectors. With a state-of-the-art facility in Dubai producing over 50,000 rolls daily.
  • We provide the technical expertise and R&D infrastructure to solve your most complex packaging challenges.
  • We provide the technical expertise and R&D infrastructure to solve your most complex packaging challenges.
Double sided tape bonds two surfaces using adhesive on both faces of a hidden carrier, so you can fix panels, trims, carpets, and signage without screws or rivets. In the UAE, the hard part is not finding tape. It is choosing one that still holds after a summer on a hot, dusty surface. This guide covers the main types, where each one works best, and how to apply and remove them cleanly.

What is double sided tape and how does it work?

Double sided tape is built from three parts: a carrier such as tissue, foam, or gauze fibre, an adhesive coated on both sides, and a release liner that peels away at the moment of use. Most variants use a pressure-sensitive adhesive, which means they bond under firm hand pressure alone. No heat, water, or curing lamp is needed.

The carrier and the adhesive together decide everything that matters: how much weight the tape holds, how it copes with heat, and how cleanly it comes off later. That is why matching the tape to the job beats reaching for the strongest roll on the shelf.

The main types of double sided tape

AAB Industries manufactures three double sided tapes, each built for a different kind of work.
Double sided tissue tape
A hot-melt adhesive on a thin tissue carrier. It is clean, hand-tearable, and ideal for light-duty indoor mounting, decor, nameplates, and stationery. It is rated for 0 to 60 degrees Celsius, so keep it for indoor, climate-controlled spaces.
Double sided foam tape
An acrylic adhesive on an EVA foam backing, 0.9 to 1.2 mm thick. The foam fills gaps on uneven surfaces, dampens vibration and seals against dust. This is the workhorse for medium and higher performance mounting in appliances, furniture and fit-out work.
Carpet tape
A synthetic rubber adhesive on a strong gauze fibre carrier. It is made for short-term floor fixing at exhibitions and events, holding carpet firmly under heavy foot traffic and lifting away afterwards.
Others
You will also see acrylic foam, VHB tape, butyl, polyester and silicone tapes mentioned online. These are specialist products for structural or high-temperature bonding. If your project needs that class of tape, talk to the AAB team about the right solution rather than forcing a general-purpose tape to do structural work.

Matching tape to UAE conditions

Heat, dust, and coastal humidity all affect how well an adhesive bond holds up over time. Rubber-based adhesives can soften under direct sunlight, fine sand can reduce tape adhesion, and salt-laden coastal air can gradually weaken the bond. 

Use the table below to identify the most suitable option for your conditions, then check the recommendations for your specific surface.

Tape Carrier and adhesive Best for Exposure
Tissue tape Tissue, hot-melt Light indoor mounting, decor, stationery Indoor only, 0 to 60 C
Foam tape EVA foam, acrylic Uneven surfaces, sealing, anti-vibration, fit-out Indoor and sheltered, higher heat tolerance
Carpet tape Gauze fibre, synthetic rubber Short-term exhibition and event flooring Indoor, keep out of direct sun

UAE Pro Tip: Rubber-based adhesives soften in direct sunlight. For anything near a window, outdoors or exposed to heat, choose an acrylic tape such as the foam variant, not a rubber carpet tape.

How to choose the right tape for your project

Run through five questions in order, and the choice becomes clear.

  • Heat and sun. Is the surface indoors and cool, or baking in the sun? Heat rules out tissue tape and favours acrylic foam.
  • Surface type. Metal and glass are easy to bond. Many plastics and powder-coated finishes are harder and need a spotless surface and the right adhesive.
  • Load and direction. How heavy is the item, and does the weight pull straight off or slide down? Foam handles heavier and uneven loads.
  • Moisture. Coastal humidity and splash call for acrylic and thorough drying.
  • Removal. Does it need to come off cleanly later? Tissue tape lifts easily indoors. Match the tape to the exit plan, not only the job.

How to apply double sided tape for a strong bond in the heat

A bond fails on the surface, not the roll. Prepare it properly and the tape does its job.

  1. Clear the dust. Wipe away sand and loose dust first. This is the single most common cause of failed bonds on UAE sites.
  2. Clean with IPA. Wipe the surface with a 50/50 to 70/30 mix of isopropyl alcohol and water. Let it dry fully before you apply the tape.
  3. Mind the temperature. Do not apply to a surface baking in midday sun. Work in the cooler part of the day or shade the surface first.
  4. Press firmly. Apply strong, even pressure, around 15 psi or more, across the whole bond so the adhesive wets out the surface.
  5. Let it cure. The bond keeps building strength for up to 72 hours. Do not load or stress the joint straight away.

How to remove double sided tape without damage

Heat and patience beat force every time. Soften the adhesive, then peel low and slow at a shallow angle.

  • Painted walls in rented apartments. Warm the tape gently with a hairdryer, peel at a shallow angle, and lift any residue with a mild solvent tested first on a hidden spot. This protects both the paint and your deposit.
  • Marble and natural stone. Avoid harsh solvents that can stain, and never use a blade. Warm, lift and wipe.
  • Glass. A plastic scraper and a little warmth remove residue safely without scratching.
UAE Pro Tip: For painted walls, reach for gentle heat, not a blade. A hairdryer on a low setting softens the adhesive so the tape releases instead of pulling the paint with it.

Frequently Asked Questions (FAQ)

Which double sided tape is best for UAE heat?
Choose an acrylic adhesive, such as double sided foam tape, for anything exposed to heat or sun. Rubber-based tapes soften in high temperatures, and tissue tape is rated only to 60 degrees Celsius for indoor use.
How much weight can double sided foam tape hold?
It depends on the surface area, the surface itself and the pressure applied. AAB’s EVA foam tape offers a holding power of more than 12 hours per kilogram. For heavy or critical loads, increase the bonded area and let the bond cure fully.
Will double sided tape damage my wall paint?
It should not if you remove it correctly. Warm the tape, peel slowly at a shallow angle, and lift residue with a mild solvent tested on a hidden area first. Tissue tape is the gentlest option for painted indoor walls.
Can I use double sided tape outdoors in Dubai?
Only with the right chemistry. Avoid rubber-based tapes in direct sun and keep tissue tape indoors. For outdoor or exposed jobs, ask the AAB team to recommend a suitable acrylic solution for the conditions.
How long should the tape cure before I load it?
Allow up to 72 hours for the bond to reach full strength. The tape grips on contact, but the adhesive continues to flow into the surface over the first few days.
How long does double sided tape last in storage?
AAB’s tissue and foam tapes have a shelf life of 12 months from production, and carpet tape should be used within 7 months. Store rolls upright in a cool, dry place away from direct sunlight and humidity.

Need the right tape for your UAE project?

Explore AAB’s double sided tape range or request a quote for bulk and custom orders. For background on tissue tape, see our 101 guide to double sided tissue tape, and for duct sealing, see aluminium tape.